|
Configurator and overview on technical data |
|
ACURO-XR - The absolutely robust encoder
The special features of the newACURO-XR series not only comprise
its particularly rugged enclosure, but also generously dimensioned,
rigid ball-bearings. Capable of withstanding even high axial and radial
loads on its shaft axis, this encoder type easily achieves a mechanical
life of 109 rotations at a permanent radial load of 200Nand simultaneously,
an axial load of 200N.
If encoders are used in applications under extreme environmental conditions, their true quality will become
obvious very soon: high mechanical loads, distinct temperature fluctuations, contaminations and corrosive
atmospheres or liquids affect conventional rotary sensors and increasingly lead to failures.
The newly designedACURO-XR makes a difference. It easily withstands highest accelerations, extreme climatic
fluctuations and even underwater operation. In this way, our rugged absolute encoder is ideally suitable
for applications in wind mills, marine or utility vehicle applications, as well as for use in presses or wood and
stone processing machinery: applications where high resistance to harsh environments and maximum reliability
are required at the same time.
|
|
Create the correct ordering code: ??0012???????? |
Technical data
Technical data
Electrical |
Supply voltage |
DC 10 ... 30V |
| Max. current w/o load |
CANopen 220 mA
BiSS 50 mA
SSI 50 mA
Analog 50 mA
Analog 50 mA
Analog 50 mA
|
| Interface |
CANopen
BiSS
SSI
0 ... 10V, 4 ... 20 mA
0 ... 10V, 4 ... 20 mA
0 ... 10V, 4 ... 20 mA
|
| Resolution |
12 Bit |
| CANopen specific data: |
| Programmable |
Resolution, Offset, Direction of code |
| Other functions |
2 pairs of limit values for end positions
Output of speed and acceleration |
|
| For further variant-specific data, please see detailed data sheets AR62/63 |
Technical data
Mechanical |
Housing diameter |
58 mm |
| Shaft diameter |
10 mm
10 mm
12 mm
12 mm
|
| Flange |
Synchro - Clamping flange |
| Max. Speed |
5.000 1/min (IP 67) |
| Vibration resistance |
20 g |
| Schock resistance |
200 g |
| Operating temperature |
-40 ... +100°C |
| Protection class |
IP 67
IP 69K
IP 67
IP 69K
|
| Shaft Material |
Stainless steel |
| Housing Material |
Aluminum (AR62)
Stainless steel (AR63)
|
|
| |
|
